Mobile Treatment Solutions

Oracle Environment Experts Ltd (OEE) designs, builds, operates and maintains a wide range of remediation systems specifically designed to address hydrocarbon releases into the environment. OEE has developed specialist recovery and treatment systems focused on NAPL recovery from surface waters and groundwater.

All our mobile treatment solutions can be utilised for rapid mobilisation during spill response, reducing the need for high-volume absorbent deployments and the costs associated with high-volume tanker uplifts. They can also be utilised, and are highly beneficial for pilot testing of groundwater conditions to evaluate LNAPL recovery, hydraulic conductivity, groundwater abstraction rates and water quality responses.

All our mobile treatment solutions have undergone HAZOP (Hazard and Operability Studies) and EHSR (Essential Health & Safety Requirements) studies. OEE engineers hold relevant WAMITAB qualifications to ensure compliance throughout the design, implementation, and operational stages.

Mobile Treatment Units

Recovery volumes of up to 4m³/hr with effluent discharges below 10mg/l (TPH ) without further polishing
Programmable Logic Controllers allow site-specific operation 7 days a week, 24 hours a day.
Primary silt settlement tank for high suspended solids concentrations, maximising oil-water separation through bespoke secondary coalescing and separation process
Remote observations via an internal monitoring camera to observe key visual indicators, and remote monitoring via SMS based telemetry unit
Controlled pneumatic delivery to operate non-emulsifying, ATEX certified diaphragm pumps and specialised automatic, top-loading LNAPL pumps

Mobile Water Treatment Units

Recovery volumes of up to 6m³/hr with effluent discharges below 10mg/l (TPH ) without further polishing
Various treatment options including oil-water separation, silt settlement, aeration and chemical dosing
Bunded options for further prevention of pollution and compliance with CIRIA C736: Design of Containment Systems for the Prevention of Water Pollution from Industrial Accidents
Remote monitoring via SMS based telemetry unit
Upscaling of treatment capability, should requirements change mid-project, using multiple Mobile Water Treatment Systems or additional modular remediation equipment

Mobile Oil Water Separators

Recovery volumes of up to 10m³/hr per system with effluent discharges below 10mg/l (TPH) without further polishing.
Bunded options for further prevention of pollution and compliance with CIRIA C736: Design of Containment Systems for the Prevention of Water Pollution from Industrial Accidents.
Interchangeable coalescing packs ensure the highest degree of surface contact and coalescing efficiency.
Can be utilised with GAC filters for the treatment of water to below laboratory detection limits.

Spill Response Units

Pre-determined loads for oil recovery and containment
Variety of treatment options, including oil skimming and pumping, aeration, chemical dosing, damming and containment
Range of containment booms
Portable water-filled GeoDams
Silt Dewatering tubes and dewatering bags
Power packs and engine-driven pumps